COMPASS for Flow PC Based Software Download/Upgrade

COMPASS for Flow PC Based Software (.exe)

Additional Downloads:

COMPASS for Flow, PC Based Software, Demo (.exe)

COMPASS for Flow, PC Based Software, Upgrade (.exe)

Patch to use COMPASS for Flow 4.0 with MET/TRACK 7.3 SP1 (.zip)

Patch to use COMPASS for Flow 4.0 with MET/TRACK 8.X (.zip)

TITLE		VER		USE WITH	DOCUMENTS
COMPASS? for Flow?		5.1.0		molbox1, molbox1+, molbox1+S, molbox RFM, MFC-CB, MFC Switchbox	COMPASS for Flow uses an on line HTML help system that is installed with the program.?Install and run COMPASS then select the [Help] menu to access the help system.
Description
Licensed users of non-current versions of COMPASS for Flow should download the upgrade version to upgrade to the current release. The demo version provides 45 days of fully functioning use of COMPASS for Flow for non-licensed users. Review the Examples in the Help file to get started. ??
Summary
COMPASS for Flow is a fully customizable macro enabled mass flow calibration software package based on the COMPASS for Pressure software platform. Unlike its predecessor, COMPASS for molbox, COMPASS for Flow natively supports non DHI flow references making it a universal mass flow calibration program. References that have a supported remote interface can be fully automated. A built in macro capability provides users a tool to perform complex real time flow computations as well as alter the test scenario based on data collected. A complete set of DUT setup, test setup and report generation tools are provided to support an unlimited set of calibration scenarios. COMPASS for Flow integrates calibration functions with Flow specific dependencies that are missing from more generic software packages. Thanks to COMPASS's flexible data output options, the data it collects is easily imported into higher level applications such as Fluke MET/TRACK?. This allows the benefits of COMPASS's specialization in Flow calibration to be enjoyed while maintaining the link to your organization's overall calibration management system.
Support Files:
Patch to use COMPASS for Flow 4.0 with MET/TRACK 7.3 SP1 Download file above. Copy the contents of the download zip file to the MET/TRACK installation directory. ?By default this is C:\Program Files\Fluke\METTRACK. ?Then run the batch file RegisterMetrackLink.bat.? Windows 7 and Windows Vista users should right click the file and choose Run As Administrator.? Patch to use COMPASS for Flow 4.0 with MET/TRACK 8.X Download file above. NOTE: This download is required only if the MET/TRACK support functionality was not properly installed with COMPASS 4.0.? By default COMPASS 4.0 includes this patch.? Copy the contents of the download zip file to the MET/TRACK installation directory. ?By default this is C:\Program Files\Fluke\METTRACK. ?Then run the batch file RegisterMetrackLink.bat.? Windows 7 and Windows Vista users should right click the file and choose Run As Administrator.?
Updates Include:
5.1.0 (2021.05.14)
FIX	COM-2		Incorrect K-factor was sometimes sent
FIX	COM-17		molCalc.dll now uses current version of TestData.dll
FIX	COM-22		Actual Temperature and Actual Pressure are prompted for now when "Skip auxiliary device test step" checkbox is checked
FIX	COM-26		More detail in the error message box when COMPASS uses a unit that is incompatible with molbox terminal
FIX	COM-28		Actual Pressure (UserDefined2) and Actual Temperature (UserDefined1) now in default "fields to log" list in [Tools], ,
FIX	COM-42		Removed error message at end of test "Remote Interface has not been enabled"
FIX	COM-91		Actual Pressure and Actual Temperature for volume flow units are no longer labeled "Ambient" in the manual entry window. Ambient Pressure and Ambient Temperature are no longer written to the datafile as Actual Pressure (UserDefined2) and Actual Temperature (UserDefined1)
5.0.50 (2019.03.21)
FIX	CPF-1		ProGas database not working
FIX	CPF-2/CPP-100		Plot/graph selection was not retained test to test
FIX	CPF-3		"Check Connections" fixed in Database --> Setup screen
FIX	CPF-4/CPP-99		Leak Test feature always stopped test
FIX	CPF-5		Jog window not scaling correctly
FIX	CPF-6		DUT and/or Auxiliary pressure and temperature devices had to be manual entry
FIX	CPP-54		New test macro UncCalc with uncertainty calculations in the default database
FIX	CPP-59		Tools menu typo fixed
FIX	CPP-68		Improved COMPASS Database Data Viewer data file import/export
FIX	CPP-75		Set command label changed to "Apply Set"
FIX	CPP-82		Test definition setup picture, warning if incompatible file type or path
FIX	CPP-94		Networked database recognizes multi-user license
FIX	CPP-98		Hold limit for "% DUT FS" was calculated based on "% DUT Span"
4.0 (2013.03.25)
ADD	CP-1340		Enabled seat-based license scheme for COMPASS for Flow, the same way as in COMPASS for Pressure. Users can connect to one setup database from different PCs as long as the active connections do not exceed the number of license seats purchased.
ADD	CP-839		The new installation of COMPASS for Flow 4.0 supports the export of data into MET/TRACK version 8.x. A separate downloadable patch was created to support the export of data into MET/TRACK 7.3.
ADD	CP-1329		Added "Custom Time" option to the pre-point menu selection to customize the dwell time, average time and regulate time of the test. The letter "C" will be added to the label of the point. The time defined in the regular test definition is the starting point for the average time, dwell time and regulate time. When "Custom Time" option is set on the point, the time values are changed starting from this point until "Custom Time" option is set on another point later.
ADD	CP-1309		Added "Tare molbox" option to the pre-point menu selection in the test definition which allows user to customize the tare pressure (upstream or downstream) on reference or DUT on any point. The letter "T" will be added to the label of the point if "Tare molbox" option is selected.
ADD	CP-1344		Added Setup Info field in the [Comment] tab of device setup form. The Setup Info field will show during the test initialization to give user setup instruction.
ADD	CP-866		Added "Setup Info" and "Setup Picture" field on the [Comment] tab of test definition form. These info will show during the test initialization to help set up the test.
ADD	CP-1392		On molbox runscreen , added "(m)" after label "Differential Pressure" if RFM micro range is in use. Also added button to change RFM micro range mode among Auto/On/Off and the active mode shows leading "*".
ADD	CP-1373		Improved intellisense in Macro Editor to include Gas Properties
ADD	CP-1372		Added more intellisense in Macro Editor to support flow macro development
ADD	CP-1368		Changed the way to sync the custom units between local unitconv.ini and compsetp.mdb. Now the custom units will only be copied from local unitconv.ini to compasetp.mdb when running COMPASS ver 4.0 (or above) the first time or upon user request from [Database][Remote Options]. The custom units stored in compsetp.mdb are copied to local unitconv.ini at the start of COMPASS run every time.
ADD	CP-1345		Created new flow fields in macro such as DUTFlow, RefFlow to provide better macro support for flow test
ADD	CP-1055		Added raw output value to the message along with final output when prompted for manual control if the raw output unit is different from the final output unit. This feature helps to run scale based rotameter.
ADD	CP-1004		If BPR Auto is selected in molbox and the test run uses A+B mode, BPR will be turned off automatically.
ADD	CP-729		Updated help file for COMPASS for Flow with better support for flow related topics.
ADD	CP-714		Added macro calculation and example DUT setup for third party Sonic nozzle flow calculation.
ADD	CP-1380		Added Rawout4 as parameter to Relationship macro so that DUTTemperature can be used in the macro.
ADD	CP-1348		Improved the content of error message in Report Editor when saving to a write-protected existing report
ADD	CP-1443		Added text indication "P","B","F" and "R" besides the Not Ready red circle indication on the molbox run screen, the same way as on the molbox front panel if supported.
ADD	CP-1283		Added Fluke 1523/1524 temperature monitor setup as example to the setup database.
ADD	CP-1136		Added more flow units to the default flow unit list: scfm@21.11C, scfm@70F, scfh@21.11C, scfh@70F
ADD	CP-1129		Made the Flow number in the molbox window bigger in bold font
ADD	CP-935		Modified MFC-CB example setup in the setup database to be able to read/set both channels and mode (vol and mA)
ADD	CP-882		Added the calculation to automatically calculate the density and compressibility if all gases in the gas mix are standard gas supported in COMPASS
ADD	CP-880		During test initialization, K factor is hidden now if reference is molbox or RFM and K factor shows if reference is other device such as MFC.
ADD	CP-844		Added option "Run Internal molbox Leak Test" on [Pre-Test] tab of the test definition with default checked. Deleted the option "Run molbox system leak test for Test Definition Leak test" on [Tools][Options][molbox] tab. This reflects the fact that this option is test specific. When this option is selected, the leak test running a test definition will be the same as selecting "Run molbox Leak Test" on the molbox run screen during manual test. If the option is not selected, COMPASS will calculate the leak rate and determine pass or fail based on the leak test setups on the [Pre-Test] tab of the test definition.
ADD	CP-863		The message showed before Reference change was not relevant when the molbloc connected to the different channels of the same molbox was used as different reference. Now the message shows the channel of the molbox.
ADD	CP-707		Added unit "%DUTFS" to be available in the test definition. This unit uses the full scale of DUT to calculate the test flow value, rather than using the span value of DUT as for %DUTSpan unit.
ADD	CP-799		Added TSI 4040 setup as example to the setup database.
ADD	CP-1445		Selected Ambient Temperature, Ambient Pressure, Ambient Humidity, AUX1, AUX2, AUX3, Reference Raw Output1, Reference Raw Output2 and Reference Raw Output3 by default in Data file in [Tools][Options][Data Header].
FIX	CP-1366		Fixed the problem of showing the error "The output range entered exceeds the range of the device" during molbox initialization even the range entered is correct
FIX	CP-1438		Fixed the problem that selecting "Manual" for actual flow unit Pressure and Temperature inputs did not prompt for value entry
FIX	CP-1319		Added "default" after the label of the default calibration of a gas and A+B mode in the "molbox1+ Ranges" dropdown list during test initialization. This will make it clear what calibration is used when A+B mode is selected. A button "Set calibration as default" was added on the molbox run screen to allow setting the active calibration to be the default calibration for the gas. This function helps user to set the default calibration using manual test so that A+B mode can use this calibration.
FIX	CP-1025		MFC output stopped reading after reference change in the middle of test if the MFC voltage source was from the reference molbox. Now the reference continues to poll the voltage output even after the reference is no longer used in the test so that MFC output continues to update.
FIX	CP-602		When changing flow units in the test and using A+B, the first test after the unit change would have either too much or too little resolution. Now the same resolution remains.
FIX	CP-1408		Added warning message if the calibration gas selected for DUT and Reference are different during test initialization.
FIX	CP-1361		Added device name and model to the end of "Auxiliary Device" on the "Manual Data Entry" form so that multiple manual auxiliary devices can differentiate from each other.
FIX	CP-1347		Excluded some features and menu items that are specific to Pressure test.
FIX	CP-1196		Test could not proceed with message "An Error Occurred While Setting Up the Active Reference or Controller Settings" during test initialization when "DUT Control" is the controller while the DUT is "Individual" rather than "Profile" device. Now the test can proceed without problem.
FIX	CP-1428		Upgraded CompassSupport.dll to PCalSupport.dll so that .NET framework 2.0 will no longer be needed to run COMPASS.
FIX	CP-1413		The temperature and pressure devices selected for actual flow unit during test initialization did not get preserved for use in the next test initialization.
FIX	CP-1390		Changed some Terminologies in data file to reflect flow test rather than pressure test.
FIX	CP-1385		The unit selected during test initialization will override the DUT unit for profile DUT only if the DUT has one raw output without relationship macro.
FIX	CP-1362		COMPASS for Flow installation now includes the flow-specific default.mdb.
FIX	CP-1331		During test initialization for Density Correction device, changing Process Gas or Calibration Gas should not change K factor. Now K factor is kept in "1" for this situation.
FIX	CP-1299		Added test event number 322 to indicate the average is truly initiated. In the case of "Manual Average", the event fires after?button clicked, while event 320 fires before the Manual Average form shows.
FIX	CP-1284		Added the devices with "DUT Temperature" as final output to list of available devices for Actual Flow Temperature readings.
FIX	CP-1282		Added "DUT Raw Output 2" as default in Data Grid and Data in File, so that "DUT Pressure" shows as default.
FIX	CP-1197		Changed status message "Waiting for stability" to "Waiting for hold/stability".
FIX	CP-1195		The flow range of A+B mode displayed on the molbox configuration window during test initialization showed the nominal range, not calculated from the real programmed range of the default calibration on channel A and channel B. Now the "Max" field of the flow range on A+B mode changes to the calculated range based on the selection of Calibration Gas.
FIX	CP-1189		Sometime "Device Label Not Specified" error message showed when saving a Device definition. Now the problem got fixed.
FIX	CP-1175		Fixed the problem that the test stopped when "Purge System" is selected on the [Pre-Test] tab of the test definition.
FIX	CP-1131		Always load both molbox channels during test initialization. Previously "Next" button only loads the active channel, which caused problem of not able to get the pre-configured channel in the test definition with reference change.
FIX	CP-1023		Fixed the problem that Tolerance Bars did not show on Data plot sometimes during the test and the report, especially for the plot "%FS Error vs. Reference Flow".
FIX	CP-1446		Resolved the problem that test could not proceed with "invalid pressure unit" error message when "inWa" was selected as pressure unit in molbox or RFM.
FIX	CP-859		DUT tolerance calculation was using DUT reading for %Reading tolerance calculation, which is wrong. Now the reference value is used to calculate DUT %Reading tolerance.
FIX	CP-857		Added support for "Ref COM2" when molbox or RFM is used as reference.
FIX	CP-833		Error message "Waiting for a device update " occurred due to the inactive reference in a test with multiple references. Now the inactive reference will be ignored when checking if all devices have readings during average.
FIX	CP-725		Fixed the unit problem for DUT Temperature which had confusing between the temperature unit selected during test initialization and the temperature unit defined in the DUT density correction. Now the DUT Temperature unit during test and in the data file uses the unit defined in the DUT density correction.
FIX	CP-1439		If actual flow unit is used in the test, the actual temperature and actual pressure readings are now logged in UserDefined1 and UserDefined2 fields in the data file.
FIX	CP-1381		Fixed the error showing during macro saving when a Global macro has more than one function.
FIX	CP-1367		Removed the duplicate "Manual Entry" from "DUT Temperature" list
FIX	CP-1130		Bloc info has been added to the title of molbox run screen and to the name of the device under "Display Device Window" to make it clear for test with multiple references on the same molbox.
FIX	CP-881		Density value had default to the last selected value when a non-standard gas is selected, which caused problem since user easily forgot to change to the correct value. Now if the density correction is used and a non-standard gas is selected as process gas, the Operating Density and Compressibility are set to 0 in default. Error message shows while saving the record if these values remain 0, which will remind user to put the correct value.
FIX	CP-1442		Changed the default to be unchecked for option "Allow selection of gases for which a molbloc is not calibrated" under Tools\Option\molbox to prevent from using non-calibrated gases.
FIX	CP-871		Fixed the problem that Database Data Viewer could not show Data section for the searched result.
FIX	CP-867		Disabled RFM from the selection of "Valve Driver"
FIX	CP-810		When molbox is used as source for 4-20 mA controller, the flow is correctly set to 0 (4mA) at the end of a test. But when MFC-CB was used as source for 4-20 mA controller, the flow remained the last flow set point. Now MFC-CB as source for 4-20 mA controller will also set flow to 0 (4mA) at the end of test.
FIX	CP-772		Enabled pre-point tare selection in the case of A+B mode to tare both A and B separately.
FIX	CP-733		The named calibration of a gas in reference molbox was not selected as the default range during test initialization. Now the default range for molbox will consider the default named calibration for the gas first, then the named calibration and the last the general calibration for the gas.
FIX	CP-727		Fixed the problem that Ref Reference Vac data field in flow data file was populated with value of Ref Temperature. The field Ref Reference Vac data field should be empty for flow data file.
FIX	CP-758		The Reference and DUT molbox run windows could not remember the location and size of last run and winded up on top of each other. Now the location and size of DUT molbox and Reference molbox will be saved separately and used as default for next test run.
?
3.00.45 (SP1) (2011.02.11)
ADD(CP-824)		Changed program Splash screen to use new Fluke Calibration logo.
FIX(CP-803)		A test that uses the "DUT Control" option to control the flow with a MFC DUT, did not properly initialize.
FIX(CP-823)		The range of A+B displays incorrectly when the A and B channels have different units of measure.
FIX(CP-822)		Loading a molbox with 2 molblocs removes one of the gases for the A channel if the A channel molbloc supports named calibrations.
Rev 3.00 (2010.02.03) Initial public release of COMPASS for Flow